Livestock Shelter, Long 12 W X 12 L X 8 H
✔️ FREE Shipping
✔️No Tax ( Except Texas)
Estimated Shipping Widget will be displayed here! (with custom color)
The 12x12x8 portable livestock shelters provide the ultimate outdoor protection for your large animals. Protect your livestock from heat, cold, snow, rain, and sun with this house-style structure. You can be sure your outdoor animals are safe from the weather, without sacrificing the ventilation they need to survive.
These shelters come without end panels, allowing your animals the freedom to run in and out as they wish. End panels can be purchased separately if needed. Assembly is easy and requires minimal time, tools, and assistance. Our pre-drilled frames save you from having to use power tools. The fire-rated, UV resistant cover will give you the peace of mind that your animals are safe while lasting long-term to get you the most return on your investment.
Please Note: End Panels Are Not Included With Livestock Shelters & Sold Separately.
- 10 oz. UV Treatment Cover
- 1 5/8″ Galvanized Steel Frame
- 4 Cable Earth Anchor Kit
About the Manufacturer
Rhino Shelters by MDM products is committed to delivering the best portable garages and shelters in the industry. They have not only met industry standards but have set the industry standards since 2001 from their location in the heart of the Milford, CT business district. Their expert team is full of knowledge and experience delivering not only the best products but for the best value.
- Heavy Duty Galvanized Finish on All Steel Frame Components for Maximum Strength & Long Life
- Easy Bolt Together Design – all Pre-drilled & Cut
- Wind Brace Support on Both Sides
- Two(2) Double Zipper Doors with Bottom Pockets
- Protective Plastic Tube End Caps – All Open Ends
- Standard Thread Plated Hardware Kit with Retaining Nuts & Protective SS Washers
- Quick Assembly Wrench included
- Heavy Duty Poly Rope for Main Cover Tie Down
- Heavy Duty Grommets on Cover & Doors
- Two Box Shipment
- Four (4) permanent anchors included
- Product Size 12’ Wide x 12’ Long x 8’ High
- Arches Four (4) on 48” Spacing 1-5/8” Frame Members
Available Colors Outer Colors: Forest Green, and Grey
All Interiors: White Only
- Shipping Weight 200 lbs shipped in two (2)boxes Shipped via Motor Freight
- Box Dimensions Box 1: 64.5″ Long x 21.5″ Wide x 6.75″ High
- Box 2: 63.5″ Long x 13.75″ Wide x 7″ High
- Main Cover UV Protected Fabric Backed Poly Material 10 0z./Sq Yard 12 Oz./Sq Meter Weight Fire Retardant Standard Main Cover & Doors meet CPAI -84 Section 5
- Anchors Four (4) 36” Anchor with U-Bolts & Drive Rod Std.
- Stock NumberLV121208HGN, LV121208HGY
Rhino Shelter’s cover fabric is unmatchable against other manufacturer’s materials.
- Rhino Shelter, uses an impressively strong fabric membrane that requires minimal maintenance. The material is a triple stack weave that has unmatched strength-to-weight ratios. All Rhino Shelter covers are made with 10oz per square yard material. We measure our fabric in yards but in meters our fabric comes out to be 12oz per square meter. Rhino Shelter fabric can be found on any Rhino Shelter portable shelter.
- All Rhino Shelter fabric membranes feature a bright white underside that allows for maximum interior light. This makes for a pleasant, bright atmosphere inside the portable shelter.
- Most important, ALL Rhino Shelter instant garages have a special layer in between the outer and inner layers called an Inner Black Scrim. The Inner Black Scrim has a coating that blocks 100% sunlight from penetrating through the material. The UV rays from the sun are very harmful to the material and the Inner Black Scrim helps to extend the life of our covers beyond those of our competitors! Along with protecting the cover, this also provides for cooler temperatures inside the portable shelter during the warmer months of the year.
- All Rhino Shelter cover fabric is infused with a special chemical inside and outside to protect it against the sun’s harmful UV Rays. This special chemical not only coats the outer fabric for protection against UV Rays but also makes the material waterproof as well as giving it protection against scuffs to preserve the outside appearance.
- Rhino Shelter heat welds all seams to go up and over the width of the portable shelter.This gives the material a drum tight fit over the frame of the portable shelter. This welding technique also adds strength to the cover’s weight ratio. The fabric will stay tight and secure on the frame and will not only give it a cleaner look, but also help the cover to last longer. We can proudly say that our covers are wrinkle free.
- Rhino Shelter instant garages are also used for temporary workshops. Many people use heaters inside to heat the portable shelters during the winter months. To this end, we also provide a chemical that makes Rhino Shelter covers fire retardant that meets even the California building code called CPIA-84.This is used on the end panels as well as the main cover. A fire retardant material is just another way we separate our covers against other manufacturers.
Important Rhino Shelter Cover Material Specifications:
- 10oz per sq yard / 12oz per sq meter fabric weight.
- 10% UV chemical treatment.
- Triple Stack Weave provides unmatched strength.
- Multiple color choices (green, gray, tan).
- Inner Black Scrim material (blocks 100% UV).
- White interior underside for light reflection.
- Reinforced rope above grommets are heat-welded to prevent grommets from pulling out. (fabric stays tight for longer life and cleaner look).
- Special coating on the outside to provide UV protection, waterproofing, and scuff protection to preserve appearance.
- 2 Year Warranty (no prorating).
- Material is made of a Rip-Stop-Poly that prevents any rips that occur from expanding.
- Material is fire resistant and meets the California building code CPIA-84. Material will self-extinguish if the source of the flame is removed.
Rhino Shelter uses T-100 Welding
Machines by Miller Weldmaster to heat weld our covers.
Steel Tubing Details
Rhino Shelter’s Heavy Duty Galvanized Structural Steel Tubing
Rhino Shelter’s Steel Tubing is unmatched against other manufacturer’s materials.
Rhino Shelter’s galvanized steel tubing is the product of choice for portable garages and portable buildings. The unique double-dipped process provides a triple layer of corrosion protection inside and out that stands the test of time.
All Rhino Shelter portable garages from the 5x10x8 Cycle Cabana to the 40x60x18 Domed Truss Building (with the exception of the Party Tents, Party Canopies, and Steel Carports) use Rhino Shelter’s heavy duty galvanized steel tubing. This ensures that all of these buildings are built to last and will hold up against harsh winds and heavy snow.
The process begins with flat strip steel, which is cold-formed and induction welded. After welding the tube goes through two coating baths. The first coating bath bonds zinc to the hot tubing and is followed by a conversion coating which provides another layer of protection for longer resistance to rust and corrosion.
The second and final protective coating bath involves a clear organic polymer that gives the tube one last barrier against corrosion as well as giving the surface an attractive brightness. The result is a smooth, shiny end product that is unmatched in terms of strength and durability – it will not dull with age, nor will the coating flake off during building construction.
Important Rhino Shelter Steel Tubing Specifications:
|•||5x10x8 – Heavy Duty Structural Steel Tubing Diameter 1 5/8″|
|•||8x8x8 – Heavy Duty Structural Steel Tubing Diameter 1 5/8″|
|•||12x12x8 – Heavy Duty Structural Steel Tubing Diameter 1 5/8″|
|•||12x20x8 – Heavy Duty Structural Steel Tubing Diameter 1 5/8″|
|•||12x24x8 – Heavy Duty Structural Steel Tubing Diameter 1 5/8″|
|•||12x24x10 – Heavy Duty Structural Steel Tubing Diameter 1 5/8″|
|•||12x28x12 – Heavy Duty Structural Steel Tubing Diameter 2 3/8″|
|•||22x24x12 – Heavy Duty Structural Steel Tubing Diameter 2 3/8″|
|•||30x30x15 – Heavy Duty Structural Steel Tubing Diameter 2 3/8″|
|•||30x40x15 – Heavy Duty Structural Steel Tubing Diameter 2 3/8″|
|•||40x60x18 – Heavy Duty Structural Steel Tubing Diameter 2 3/8″|